AMS1117 SMD package 3-pin voltage regulator

$0.0313

Features

  • Fixed/Adjustable 3-terminal Linear voltage regulator
  • Low Drop-Out (LDO) Voltage regulator
  • Fixed Voltage type: 1.5V, 1.8V, 2.5V, 2.85V, 3.3V and 5V
  • Variable Voltage range: 1.25V to 13.8V
  • Output current is 1000mA
  • Maximum Drop-out Voltage: 1.3V
  • In-built Current Limiting and thermal protection.
  • Operating junction temperature is 125°C
  • Available in SOT-223, TO-252 and SO-8 Package
SKU: AMS1117 Category:

Description

The AMS1117 is a popular SMD package 3-pin voltage regulator that is available in many models for fixed and adjustable voltage requirements. The IC can deliver a maximum current of 1A and the output voltage can vary from 1.5V to 5V. It also has a low drop out voltage of 1.3V when operating at maximum current.

 

Pin Configuration

Pin Number Pin Name Description
1 Adjust/Ground This pins adjusts the output voltage, if it is a fixed voltage regulator it acts as ground
2 Output Voltage (Vout) The regulated output voltage set by the adjust pin can be obtained from this pin
3 Input Voltage (Vin) The input voltage which has to be regulated is given to this pin

 

Features

  • Fixed/Adjustable 3-terminal Linear voltage regulator
  • Low Drop-Out (LDO) Voltage regulator
  • Fixed Voltage type: 1.5V, 1.8V, 2.5V, 2.85V, 3.3V and 5V
  • Variable Voltage range: 1.25V to 13.8V
  • Output current is 1000mA
  • Maximum Drop-out Voltage: 1.3V
  • In-built Current Limiting and thermal protection.
  • Operating junction temperature is 125°C
  • Available in SOT-223, TO-252 and SO-8 Package

 

How to use AMS1117

Using the AMS1117 is pretty much straight forward. If it a fixed voltage regulator just power the IC though the Vin pin and the regulated output can be obtained in the Vout pin. The Adj/Ground pin in this case acts only as a ground pin and is grounded. Also a capacitor can be added at the output side to filter out the noise.  The circuit diagram for a variable output regulator is show below

Circuit diagram for a variable output regulator

 

For an Adjustable type voltage regulator we need two external resistors to decide the output voltage of the Regulator. A reference circuit diagram for adjustable voltage is shown below, where the resistors R1 and R2 decides the output voltage of the regulator. The capacitor CAdj is an optional component which can be added to improve ripple rejection if required.  The other two capacitors are to filter the input and output noise respectively.

Circuit diagram for adjustable voltage

 

The formulae to calculate the output voltage of AMS1117 regulator is given below. Select the value of R1 and R2 based on the output voltage required for your project. Keep in mind that the value of R1 should be less than 1k. You can use a variable resistor at R2 if you want to vary the voltage in real time.

VOUT = VREF (1 + R2/R1) + IADJR2

 

With the ability to be used as a fixed voltage or a variable voltage regulator the AMS1117 often finds its application in battery charging circuit and can also be designed to provide negative voltage if required. Refer the datasheet at the end of this page to find more application circuits for this IC.

 

Applications

  • Used for Positive voltage regulations
  • Variable power supply
  • Current limiting circuits
  • Reverse polarity circuits
  • Commonly used in Desktop PC, DVD and other consumer products
  • Used in motor control circuits

 

Additional information

Weight 1 kg

Reviews

There are no reviews yet.

Be the first to review “AMS1117 SMD package 3-pin voltage regulator”

Your email address will not be published. Required fields are marked *